print(md5(234));

15. Sideburn Series – Extends NoseCone® effect down front corners below the NoseCone

SideBurn 2 – NoseCone® SideBurn Type 2 for use with Wrap Around type NC xx.1 NoseCone Models

The SB2 set is used to enhance the aerodynamic package of the NoseCone by extending a rounded leading edge down the side front corners of the truck body below the NoseCone. Adding on average an additional 2% fuel savings to the NoseCone they are very cost effective. The SideBurn models are generally sold in pairs and are mounted butted directly below the NoseCone.
The SB2 can also be purchased individually to be mounted horizontally as a small fairing for service bodies etc.

SideBurn-2

SideBurn 2.4 – NoseCone® SideBurn Type 2 for use with Face Fix type NC xx.4 NoseCone Models

The SB2.4 series are ideally matched a number of NoseCone Models but best suited to use with the NC xx.4 Face Fix series. SideBurns are used to enhance the aerodynamic package of the NoseCone by extending a rounded leading edge down the side front corners of the truck body below the NoseCone. Adding on average an additional 2% fuel savings to the NoseCone they are very cost effective. The SideBurn models are generally sold in pairs and are mounted butted directly below the NoseCone.

SideBurn-2-4

SideBurn 3.4 – NoseCone® SideBurn Type 3 SlimLine tapered for use with Wrap Around or Face Fix

The SB3.4 is for use with Wrap Around and / or Face Fix type NC xx.1 or xx.4  NoseCone Models. Also Tapered from top to bottom they permit trimming to use in close fitting situations. Sideburns are used to enhance the aerodynamic package of the NoseCone by extending a rounded leading edge down the side front corners of the truck body below the NoseCone. Adding on average an additional 2% fuel savings to the NoseCone they are very cost effective. The SideBurn models are generally sold in pairs and are mounted butted directly below the NoseCone.

SideBurn-3-4

SideBurn M – NoseCone® SideBurn Type 2 SlimLine for use with Wrap Around type NC xx.1 NoseCone Models with limited clearance.

The SB M Sideburn is used to enhance the aerodynamic package of the NoseCone by extending a rounded leading edge down the side front corners of the truck body below the NoseCone. Adding on average an additional 1 – 2% fuel savings to the NoseCone the SB-M are very cost effective. The SideBurn models are generally sold in pairs and are mounted butted directly below the NoseCone.

The SB2 can also be purchased individually to be mounted horizontally as a small fairing for service bodies, campers etc.

SideBurn-M

AER2034button

Save